P12040 1710-2170 and 2300-2690 Combiner Datasheet
-Low insertion loss
-DC and AISG Issue 2.0 Passthru on selected ports
-Mounting on wall or on poles in various dimensions
-Suitable for outdoor and indoor applications
Radio Frequency Components and Modules
P12040-XXX
Combiner 1710 - 2170, 2300 - 2690 MHz
-Designed for multi-band co-located sites |
1710 – 2170 CHANNEL |
|
Pass-band | 1710 - 2170 MHz |
Insertion loss | 0.20 dB max (0.15 dB typical) |
Attenuation |
|
2300 - 2690 MHz | 50 dB min |
2300 – 2690 CHANNEL |
|
Pass-band | 2300 - 2690 MHz |
Insertion loss | 0.20 dB max (0.15 dB typical) |
Attenuation |
|
1710 - 2170 MHz | 50 dB min |
|
|
GENERAL SPECIFICATION |
|
Impedance | 50 ohms |
VSWR / Return loss | 1.29 / -18 dB min, all ports |
Input power per channels | 250 W max average |
Passive intermodulation | < -110 dBm for two tones at downlink band, at 20W each |
DC/AISG |
|
Connection | Factory configurable see ordering information for details |
Max current | 2.0 A continuous, 4A peak |
Max voltage | ± 33V max |
OOK signal insertion loss (2.176 MHz) | 0.8 dB max |
OOK signal return loss (2.176 MHz) | 12 dB min |
Environmental rating | ETSI EN 300 019 class 4.1 |
Ingress protection | IP67 |
Lightning protection | ±5 kA, 8/20us, M6 earth stud fitted |
Operating temperature | -40to + 65ºC |
Altitude | 2000 meter max |
MTBF | > 500,000 hours |
EMC | ETS 300 342-3 |
Sketch dimensions (H x W x D) | 150 x 110 x 51 mm, single unit |
| 150 x 110 x 71.5 mm, single unit with bracket |
| 150 x 110 x 118.5 mm, double units with bracket |
Weight | 1.6 kg max., single unit |
| 1.7kg max., single unit with bracket |
| 3.3 kg max., dual unit with bracket |
Surface treatment | Powder coating, color NCS 1502-R |
Bracket | Stainless steel 304 |
Mounting | Pole / wall bracket supplied with two metal clamps for 46 mm min diameter poles |
Protection ground | M6 screw (SS 304) |
Connectors type | DIN 7/16 female, long barrel |
P12040- x y z |
|
|
x | y | z |
Single = 1 | No bracket = 0 | DC all ports = 0 |
Dual = 2 | Bracket = 1 | DC block all ports = 1 |
|
| DC pass 1710 - 2170 MHz = 2 |
|
| DC pass 2300 - 2690 MHz = 3 |